Skip to main content

Material workshopLaajuus (10 cr)

Code: MU00DT18

Credits

10 op

Objective

General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.

The content of courses included in the module vary, depending on the field of study.

Content

How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?

Enrollment

14.08.2024 - 08.09.2024

Timing

02.09.2024 - 20.12.2024

Number of ECTS credits allocated

10 op

Mode of delivery

Contact teaching

Unit

Department of Culture

Campus

Kouvola Campus

Teaching languages
  • Finnish
Seats

20 - 25

Degree programmes
  • Degree Programme in Bioproduct Design
  • Degree Programme in Fashion and Costume Design
  • Degree Programme in Interior Architecture and Furniture Design
Teachers
  • Joni Yrjönen
  • Jari-Pekka Muotio
Teacher in charge

Jari-Pekka Muotio

Groups
  • SKKV24SP
    Interior architecture and furniture design, full-time studies

Objective

General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.

The content of courses included in the module vary, depending on the field of study.

Content

How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?

Opiskelumateriaali

Saatavilla opintojakson Learn alustalla.
Ammattialan kirjallisuus

Yksilölliset oppimisväylät

Työviikkopohjainen oppimisväylä:
Lukujärjestyksen mukainen eteneminen. Viikko kohtaiset harjoitustehtävät

Opintoja nopeuttava oppimisväylä:
Työhön integroitu oppimisväylä on mahdollinen, jos työtehtävissäsi voit kehittää opintojakson tavoitteissa ja sisällöissä mainittua osaamista. Ota opintojakson opettajaan yhteyttä hyvissä ajoin ennen opintojakson alkua sen määrittämiseksi.

Työhön integroitu oppimisväylä:
Ota yhteyttä opintovastaavaasi eri mahdollisuuksien selvittämiseksi.

TKI ja työelämäyhteistyö

-

Opiskelijan työmäärä

Opiskelijan työmäärä 10 op = 270 t

Evaluation scale

1-5

Assessment methods and criteria

Hyväksytyt harjoitustyöt
aktiivinen tuntiosallistuminen

Enrollment

21.08.2023 - 01.09.2023

Timing

05.09.2023 - 14.12.2023

Number of ECTS credits allocated

10 op

Mode of delivery

Contact teaching

Unit

Department of Culture

Campus

Kouvola Campus

Teaching languages
  • Finnish
Seats

20 - 25

Degree programmes
  • Degree Programme in Bioproduct Design
  • Degree Programme in Fashion and Costume Design
  • Degree Programme in Interior Architecture and Furniture Design
Teachers
  • Joni Yrjönen
  • Tommi Rintamäki
Teacher in charge

Tommi Rintamäki

Groups
  • SKKV23SP
    Interior architecture and furniture design, full-time studies

Objective

General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.

The content of courses included in the module vary, depending on the field of study.

Content

How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?

Opiskelumateriaali

Available in Learn platform.

Yksilölliset oppimisväylät

Xamk offers its students an opportunity to pursue studies flexibly to suit their various life situations. Students can choose between three learning routes: a learning route based on a working week, a learning route that accelerates the studies, and a work-based learning route.

A learning route based on a working week according to timetable.

TKI ja työelämäyhteistyö

Possible working life oriented excercise, in which assignment from external cooperation company.

Evaluation scale

1-5

Enrollment

02.01.2023 - 15.01.2023

Timing

01.01.2023 - 01.05.2023

Number of ECTS credits allocated

10 op

Virtual portion

2 op

Mode of delivery

80 % Contact teaching, 20 % Distance learning

Unit

Department of Culture

Campus

Kouvola Campus

Teaching languages
  • Finnish
Seats

18 - 25

Degree programmes
  • Degree Programme in Bioproduct Design
  • Degree Programme in Fashion and Costume Design
  • Degree Programme in Interior Architecture and Furniture Design
Teachers
  • Iida Silvennoinen
  • Seija Kiuru-Lavaste
Teacher in charge

Seija Kiuru-Lavaste

Groups
  • MPKV23KP
    Fashion and costume design, full-time studies

Objective

General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.

The content of courses included in the module vary, depending on the field of study.

Content

How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?

Opiskelumateriaali

Literature and online materials, material compiled and shared by teachers and material compiled by students.
All material can be found on the Learn platform of the study course

Yksilölliset oppimisväylät

A learning route based on a working week according to timetable.

TKI ja työelämäyhteistyö

Kurssi on peruskurssi joten työelämäyhteistyö koskee vain vaatetusalan perusteet hallitsevia.

Tentit ja muut määräajat

-

Kansainvälinen yhteistyö

The course doesn't include international projects.

Opiskelijan työmäärä

-

Toteutuksen osien kuvaus

-

Further information

-

Evaluation scale

1-5

Assessment methods and criteria

-

Enrollment

22.08.2022 - 28.08.2022

Timing

30.08.2022 - 15.12.2022

Number of ECTS credits allocated

10 op

Mode of delivery

Contact teaching

Unit

Department of Culture

Campus

Kouvola Campus

Teaching languages
  • Finnish
Seats

20 - 25

Degree programmes
  • Degree Programme in Bioproduct Design
  • Degree Programme in Fashion and Costume Design
  • Degree Programme in Interior Architecture and Furniture Design
Teachers
  • Joni Yrjönen
  • Tommi Rintamäki
Teacher in charge

Tommi Rintamäki

Groups
  • SKKV22SP
    Interior architecture and furniture design, full-time studies

Objective

General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.

The content of courses included in the module vary, depending on the field of study.

Content

How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?

Opiskelumateriaali

Available in Learn platform.

Yksilölliset oppimisväylät

Xamk offers its students an opportunity to pursue studies flexibly to suit their various life situations. Students can choose between three learning routes: a learning route based on a working week, a learning route that accelerates the studies, and a work-based learning route.

A learning route based on a working week according to timetable.

TKI ja työelämäyhteistyö

Possible working life oriented excercise, in which assignment from external cooperation company.

Evaluation scale

1-5

Enrollment

03.01.2022 - 16.01.2022

Timing

10.01.2022 - 29.04.2022

Number of ECTS credits allocated

10 op

Virtual portion

3 op

RDI portion

1 op

Mode of delivery

70 % Contact teaching, 30 % Distance learning

Unit

Department of Culture

Campus

Kouvola Campus

Teaching languages
  • Finnish
Seats

12 - 22

Degree programmes
  • Degree Programme in Bioproduct Design
  • Degree Programme in Fashion and Costume Design
  • Degree Programme in Interior Architecture and Furniture Design
Teachers
  • Iida Silvennoinen
  • Seija Kiuru-Lavaste
Teacher in charge

Seija Kiuru-Lavaste

Groups
  • MPKV22KP
    Fashion and costume design, full-time studies

Objective

General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.

The content of courses included in the module vary, depending on the field of study.

Content

How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?

Opiskelumateriaali

Alan kirjallisuus ja verkkomateriaalit, opettajien kokoama ja jakama materiaali ja opiskelijoiden kokoama materiaali.

Yksilölliset oppimisväylät

Työviikkopohjainen oppimisväylä

Mahdollisesta yksilöllisestä oppimisväylästä tulee neuvotella opettajien kanssa.

Opiskelua on mahdollista suorittaa joustavasti kolmea eri oppimisväylää:
- Työviikkopohjainen oppimisväylä
- Opintoja nopeuttava oppimisväylä
- Työhön integroitu oppimisväylä
Lisätietoja: https://ksamk.sharepoint.com/sites/Opiskelu/SitePages/Opinnot.aspx

Oppimisväylistä keskustellaan ovan kanssa Hops-keskusteluissa ja sovitaan lopullisesti opintojakson opettajan kanssa

TKI ja työelämäyhteistyö

Kurssi on peruskurssi joten työelämäyhteistyö koskee vain vaatetusalan perusteet hallitsevia.

Tentit ja muut määräajat

Opintojaksolla on tehtäviä ja myös tenttejä. Ajoitus selviää jakson alussa.

Opiskelijan työmäärä

Opiskelijan työmäärä on yhtä opintopistettä kohden 27 tuntia
10 op on yhteensä 270 tuntia, josta kontaktiopetusta on 140-150 tuntia ja loput itsenäistä työskentelyä.

Toteutuksen osien kuvaus

!0 op jakaantuu seuraavasti
- Materiaalituntemus 3 op
- Ammattitekniikka, koneet ja laitteet 2 op
- Kaavoitus 2 op
- Kankaankuviointi 3 op

Further information

Opettajina toimivat Iida Silvennoinen ja Seija Kiuru-Lavaste

Evaluation scale

1-5

Assessment methods and criteria

Osallistuminen kontaktiopetukseen ja tehtävien tekeminen määräajassa.
Itsearviointi, reflektointi ja vertaisarviointi.

Enrollment

03.01.2022 - 16.01.2022

Timing

01.01.2022 - 01.05.2022

Number of ECTS credits allocated

10 op

Mode of delivery

Contact teaching

Unit

Department of Culture

Campus

Kouvola Campus

Teaching languages
  • Finnish
Seats

22 - 25

Degree programmes
  • Degree Programme in Bioproduct Design
  • Degree Programme in Fashion and Costume Design
  • Degree Programme in Interior Architecture and Furniture Design
Teachers
  • Joni Yrjönen
  • Tommi Rintamäki
Teacher in charge

Tommi Rintamäki

Groups
  • BTMKV22KP
    Bioproduct design, full-time studies

Objective

General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.

The content of courses included in the module vary, depending on the field of study.

Content

How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?

Opiskelumateriaali

Available in Learn platform.

Yksilölliset oppimisväylät

Xamk offers its students an opportunity to pursue studies flexibly to suit their various life situations. Students can choose between three learning routes: a learning route based on a working week, a learning route that accelerates the studies, and a work-based learning route.

A learning route based on a working week according to timetable.

TKI ja työelämäyhteistyö

Possible working life oriented excercise, in which assignment from external cooperation company.

Opiskelijan työmäärä

5cr is 135h where contact teaching is 70h and independence working is 65h

Further information

Learning tasks which are related to the subject will be carried out in the study module.

Evaluation scale

1-5

Assessment methods and criteria

Student's self-reflection and peer evaluation
Active participation and approved assignments