Strength of materialsLaajuus (5 cr)
Code: RA00CY07
Credits
5 op
Objective
You know the basics of the strength of materials needed in construction design.
You know how to estimate the behaviour of a loaded structure and understand different material properties and material models.
You know how to calculate geometric properties of a cross section.
You know how to determine the load bearing capacity of a cross section.
You know how to calculate the deformations of structures.
Content
Core content
What are material properties and material models?
What is the stress-strain diagram and how is it determined?
What are the geometric properties of a beam, pile or other cross section?
What are the relationships between stresses of cross sections and internal forces of cross sections?
What does the ultimate state design mean?
What are the deformations of structures?
What does the serviceability limit state design mean?
Complementary knowledge
What are basic principles of designing steel structures?
What are stresses and reference stresses in steel structure and weld?
What is fatigue strength?
Specialist knowledge
How to configure the calculations of stresses and deformations in 3D situations and how to use FEM programs?
What is the function of composite struction?
Qualifications
Professional studies
Statics of structures
Materials
Professional studies
Statically indeterminate structures
Further information
The course may be replaced / partially replaced by a corresponding course of the same content completed at another educational institution. In this case, the replacement requires the successful completion of the final exam of the course.
Enrollment
08.04.2024 - 21.04.2024
Timing
02.09.2024 - 20.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
5 - 50
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Juha Karvonen
Teacher in charge
Juha Karvonen
Groups
-
RAKT23SPConstruction engineering, full-time studies
Objective
You know the basics of the strength of materials needed in construction design.
You know how to estimate the behaviour of a loaded structure and understand different material properties and material models.
You know how to calculate geometric properties of a cross section.
You know how to determine the load bearing capacity of a cross section.
You know how to calculate the deformations of structures.
Content
Core content
What are material properties and material models?
What is the stress-strain diagram and how is it determined?
What are the geometric properties of a beam, pile or other cross section?
What are the relationships between stresses of cross sections and internal forces of cross sections?
What does the ultimate state design mean?
What are the deformations of structures?
What does the serviceability limit state design mean?
Complementary knowledge
What are basic principles of designing steel structures?
What are stresses and reference stresses in steel structure and weld?
What is fatigue strength?
Specialist knowledge
How to configure the calculations of stresses and deformations in 3D situations and how to use FEM programs?
What is the function of composite struction?
Evaluation scale
1-5
Qualifications
Professional studies
Statics of structures
Further information
The course may be replaced / partially replaced by a corresponding course of the same content completed at another educational institution. In this case, the replacement requires the successful completion of the final exam of the course.
Enrollment
08.04.2024 - 21.04.2024
Timing
02.09.2024 - 20.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Savonlinna Campus
Teaching languages
- Finnish
Seats
5 - 30
Degree programmes
- Degree Programme in Industrial Wood Construction
Teachers
- Marko Voutilainen
Teacher in charge
Marko Voutilainen
Groups
-
PRSA23SPIndustrial wood construction, full-time studies
Objective
You know the basics of the strength of materials needed in construction design.
You know how to estimate the behaviour of a loaded structure and understand different material properties and material models.
You know how to calculate geometric properties of a cross section.
You know how to determine the load bearing capacity of a cross section.
You know how to calculate the deformations of structures.
Content
Core content
What are material properties and material models?
What is the stress-strain diagram and how is it determined?
What are the geometric properties of a beam, pile or other cross section?
What are the relationships between stresses of cross sections and internal forces of cross sections?
What does the ultimate state design mean?
What are the deformations of structures?
What does the serviceability limit state design mean?
Complementary knowledge
What are basic principles of designing steel structures?
What are stresses and reference stresses in steel structure and weld?
What is fatigue strength?
Specialist knowledge
How to configure the calculations of stresses and deformations in 3D situations and how to use FEM programs?
What is the function of composite struction?
Evaluation scale
1-5
Qualifications
Professional studies
Statics of structures
Further information
The course may be replaced / partially replaced by a corresponding course of the same content completed at another educational institution. In this case, the replacement requires the successful completion of the final exam of the course.
Enrollment
06.11.2023 - 17.11.2023
Timing
08.01.2024 - 30.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
15 - 45
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Juha Karvonen
Teacher in charge
Juha Karvonen
Groups
-
RAKT23KMConstruction engineering, part-time studies
Objective
You know the basics of the strength of materials needed in construction design.
You know how to estimate the behaviour of a loaded structure and understand different material properties and material models.
You know how to calculate geometric properties of a cross section.
You know how to determine the load bearing capacity of a cross section.
You know how to calculate the deformations of structures.
Content
Core content
What are material properties and material models?
What is the stress-strain diagram and how is it determined?
What are the geometric properties of a beam, pile or other cross section?
What are the relationships between stresses of cross sections and internal forces of cross sections?
What does the ultimate state design mean?
What are the deformations of structures?
What does the serviceability limit state design mean?
Complementary knowledge
What are basic principles of designing steel structures?
What are stresses and reference stresses in steel structure and weld?
What is fatigue strength?
Specialist knowledge
How to configure the calculations of stresses and deformations in 3D situations and how to use FEM programs?
What is the function of composite struction?
Evaluation scale
1-5
Qualifications
Professional studies
Statics of structures
Further information
The course may be replaced / partially replaced by a corresponding course of the same content completed at another educational institution. In this case, the replacement requires the successful completion of the final exam of the course.
Enrollment
06.04.2023 - 21.04.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Savonlinna Campus
Teaching languages
- Finnish
Seats
5 - 30
Degree programmes
- Degree Programme in Industrial Wood Construction
Teachers
- Marko Voutilainen
Teacher in charge
Marko Voutilainen
Groups
-
PRSA22SPIndustrial Wood Construction, full-time studies
Objective
You know the basics of the strength of materials needed in construction design.
You know how to estimate the behaviour of a loaded structure and understand different material properties and material models.
You know how to calculate geometric properties of a cross section.
You know how to determine the load bearing capacity of a cross section.
You know how to calculate the deformations of structures.
Content
Core content
What are material properties and material models?
What is the stress-strain diagram and how is it determined?
What are the geometric properties of a beam, pile or other cross section?
What are the relationships between stresses of cross sections and internal forces of cross sections?
What does the ultimate state design mean?
What are the deformations of structures?
What does the serviceability limit state design mean?
Complementary knowledge
What are basic principles of designing steel structures?
What are stresses and reference stresses in steel structure and weld?
What is fatigue strength?
Specialist knowledge
How to configure the calculations of stresses and deformations in 3D situations and how to use FEM programs?
What is the function of composite struction?
Evaluation scale
1-5
Qualifications
Professional studies
Statics of structures
Further information
The course may be replaced / partially replaced by a corresponding course of the same content completed at another educational institution. In this case, the replacement requires the successful completion of the final exam of the course.
Enrollment
06.04.2023 - 21.04.2023
Timing
04.09.2023 - 20.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kotka Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Juha Karvonen
Teacher in charge
Juha Karvonen
Groups
-
RAKT22SPConstruction engineering, full-time studies
Objective
You know the basics of the strength of materials needed in construction design.
You know how to estimate the behaviour of a loaded structure and understand different material properties and material models.
You know how to calculate geometric properties of a cross section.
You know how to determine the load bearing capacity of a cross section.
You know how to calculate the deformations of structures.
Content
Core content
What are material properties and material models?
What is the stress-strain diagram and how is it determined?
What are the geometric properties of a beam, pile or other cross section?
What are the relationships between stresses of cross sections and internal forces of cross sections?
What does the ultimate state design mean?
What are the deformations of structures?
What does the serviceability limit state design mean?
Complementary knowledge
What are basic principles of designing steel structures?
What are stresses and reference stresses in steel structure and weld?
What is fatigue strength?
Specialist knowledge
How to configure the calculations of stresses and deformations in 3D situations and how to use FEM programs?
What is the function of composite struction?
Evaluation scale
1-5
Qualifications
Professional studies
Statics of structures
Further information
The course may be replaced / partially replaced by a corresponding course of the same content completed at another educational institution. In this case, the replacement requires the successful completion of the final exam of the course.
Enrollment
06.04.2022 - 22.04.2022
Timing
29.08.2022 - 19.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Savonlinna Campus
Teaching languages
- Finnish
Seats
5 - 30
Degree programmes
- Degree Programme in Industrial Wood Construction
Teachers
- Marko Voutilainen
Teacher in charge
Marko Voutilainen
Groups
-
PRSA21SPIndustrial Wood Construction, full-time studies
Objective
You know the basics of the strength of materials needed in construction design.
You know how to estimate the behaviour of a loaded structure and understand different material properties and material models.
You know how to calculate geometric properties of a cross section.
You know how to determine the load bearing capacity of a cross section.
You know how to calculate the deformations of structures.
Content
Core content
What are material properties and material models?
What is the stress-strain diagram and how is it determined?
What are the geometric properties of a beam, pile or other cross section?
What are the relationships between stresses of cross sections and internal forces of cross sections?
What does the ultimate state design mean?
What are the deformations of structures?
What does the serviceability limit state design mean?
Complementary knowledge
What are basic principles of designing steel structures?
What are stresses and reference stresses in steel structure and weld?
What is fatigue strength?
Specialist knowledge
How to configure the calculations of stresses and deformations in 3D situations and how to use FEM programs?
What is the function of composite struction?
Evaluation scale
1-5
Qualifications
Professional studies
Statics of structures
Further information
The course may be replaced / partially replaced by a corresponding course of the same content completed at another educational institution. In this case, the replacement requires the successful completion of the final exam of the course.
Enrollment
06.04.2022 - 22.04.2022
Timing
01.08.2022 - 31.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kotka Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Juha Karvonen
Teacher in charge
Juha Karvonen
Groups
-
RAKT21SPConstruction engineering, full-time studies
Objective
You know the basics of the strength of materials needed in construction design.
You know how to estimate the behaviour of a loaded structure and understand different material properties and material models.
You know how to calculate geometric properties of a cross section.
You know how to determine the load bearing capacity of a cross section.
You know how to calculate the deformations of structures.
Content
Core content
What are material properties and material models?
What is the stress-strain diagram and how is it determined?
What are the geometric properties of a beam, pile or other cross section?
What are the relationships between stresses of cross sections and internal forces of cross sections?
What does the ultimate state design mean?
What are the deformations of structures?
What does the serviceability limit state design mean?
Complementary knowledge
What are basic principles of designing steel structures?
What are stresses and reference stresses in steel structure and weld?
What is fatigue strength?
Specialist knowledge
How to configure the calculations of stresses and deformations in 3D situations and how to use FEM programs?
What is the function of composite struction?
Evaluation scale
1-5
Qualifications
Professional studies
Statics of structures
Further information
The course may be replaced / partially replaced by a corresponding course of the same content completed at another educational institution. In this case, the replacement requires the successful completion of the final exam of the course.
Enrollment
08.11.2021 - 21.11.2021
Timing
03.01.2022 - 01.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
20 - 50
Degree programmes
- Degree Programme in Construction Engineering
Teachers
- Juha Karvonen
Teacher in charge
Juha Karvonen
Groups
-
RAKT21KMConstruction engineering, part-time studies
Objective
You know the basics of the strength of materials needed in construction design.
You know how to estimate the behaviour of a loaded structure and understand different material properties and material models.
You know how to calculate geometric properties of a cross section.
You know how to determine the load bearing capacity of a cross section.
You know how to calculate the deformations of structures.
Content
Core content
What are material properties and material models?
What is the stress-strain diagram and how is it determined?
What are the geometric properties of a beam, pile or other cross section?
What are the relationships between stresses of cross sections and internal forces of cross sections?
What does the ultimate state design mean?
What are the deformations of structures?
What does the serviceability limit state design mean?
Complementary knowledge
What are basic principles of designing steel structures?
What are stresses and reference stresses in steel structure and weld?
What is fatigue strength?
Specialist knowledge
How to configure the calculations of stresses and deformations in 3D situations and how to use FEM programs?
What is the function of composite struction?
Evaluation scale
1-5
Qualifications
Professional studies
Statics of structures
Further information
The course may be replaced / partially replaced by a corresponding course of the same content completed at another educational institution. In this case, the replacement requires the successful completion of the final exam of the course.