Material workshopLaajuus (10 cr)
Code: MU00DT18
Credits
10 op
Objective
General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.
The content of courses included in the module vary, depending on the field of study.
Content
How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?
Enrollment
08.04.2024 - 21.04.2024
Timing
02.09.2024 - 20.12.2024
Number of ECTS credits allocated
10 op
Mode of delivery
Contact teaching
Campus
Kouvola Campus
Teaching languages
- Finnish
Seats
20 - 25
Degree programmes
- Degree Programme in Bioproduct Design
- Degree Programme in Fashion and Costume Design
- Degree Programme in Interior Architecture and Furniture Design
Teachers
- Joni Yrjönen
- Jari-Pekka Muotio
Teacher in charge
Jari-Pekka Muotio
Groups
-
SKKV24SPInterior architecture and furniture design, full-time studies
Objective
General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.
The content of courses included in the module vary, depending on the field of study.
Content
How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?
Evaluation scale
1-5
Enrollment
21.08.2023 - 01.09.2023
Timing
05.09.2023 - 14.12.2023
Number of ECTS credits allocated
10 op
Mode of delivery
Contact teaching
Campus
Kouvola Campus
Teaching languages
- Finnish
Seats
20 - 25
Degree programmes
- Degree Programme in Bioproduct Design
- Degree Programme in Fashion and Costume Design
- Degree Programme in Interior Architecture and Furniture Design
Teachers
- Joni Yrjönen
- Tommi Rintamäki
Teacher in charge
Tommi Rintamäki
Groups
-
SKKV23SPInterior architecture and furniture design, full-time studies
Objective
General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.
The content of courses included in the module vary, depending on the field of study.
Content
How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?
Materials
Available in Learn platform.
Teaching methods
Xamk offers its students an opportunity to pursue studies flexibly to suit their various life situations. Students can choose between three learning routes: a learning route based on a working week, a learning route that accelerates the studies, and a work-based learning route.
A learning route based on a working week according to timetable.
Employer connections
Possible working life oriented excercise, in which assignment from external cooperation company.
Evaluation scale
1-5
Enrollment
02.01.2023 - 15.01.2023
Timing
01.01.2023 - 01.05.2023
Number of ECTS credits allocated
10 op
Virtual portion
2 op
Mode of delivery
80 % Contact teaching, 20 % Distance learning
Campus
Kouvola Campus
Teaching languages
- Finnish
Seats
18 - 25
Degree programmes
- Degree Programme in Bioproduct Design
- Degree Programme in Fashion and Costume Design
- Degree Programme in Interior Architecture and Furniture Design
Teachers
- Iida Silvennoinen
- Seija Kiuru-Lavaste
Teacher in charge
Seija Kiuru-Lavaste
Groups
-
MPKV23KPFashion and costume design, full-time studies
Objective
General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.
The content of courses included in the module vary, depending on the field of study.
Content
How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?
Materials
Literature and online materials, material compiled and shared by teachers and material compiled by students.
All material can be found on the Learn platform of the study course
Teaching methods
A learning route based on a working week according to timetable.
Exam schedules
-
International connections
The course doesn't include international projects.
Student workload
-
Content scheduling
-
Further information
-
Evaluation scale
1-5
Assessment methods and criteria
-
Enrollment
22.08.2022 - 28.08.2022
Timing
30.08.2022 - 15.12.2022
Number of ECTS credits allocated
10 op
Mode of delivery
Contact teaching
Campus
Kouvola Campus
Teaching languages
- Finnish
Seats
20 - 25
Degree programmes
- Degree Programme in Bioproduct Design
- Degree Programme in Fashion and Costume Design
- Degree Programme in Interior Architecture and Furniture Design
Teachers
- Joni Yrjönen
- Tommi Rintamäki
Teacher in charge
Tommi Rintamäki
Groups
-
SKKV22SPInterior architecture and furniture design, full-time studies
Objective
General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.
The content of courses included in the module vary, depending on the field of study.
Content
How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?
Materials
Available in Learn platform.
Teaching methods
Xamk offers its students an opportunity to pursue studies flexibly to suit their various life situations. Students can choose between three learning routes: a learning route based on a working week, a learning route that accelerates the studies, and a work-based learning route.
A learning route based on a working week according to timetable.
Employer connections
Possible working life oriented excercise, in which assignment from external cooperation company.
Evaluation scale
1-5
Enrollment
03.01.2022 - 16.01.2022
Timing
10.01.2022 - 29.04.2022
Number of ECTS credits allocated
10 op
Virtual portion
3 op
RDI portion
1 op
Mode of delivery
70 % Contact teaching, 30 % Distance learning
Campus
Kouvola Campus
Teaching languages
- Finnish
Seats
12 - 22
Degree programmes
- Degree Programme in Bioproduct Design
- Degree Programme in Fashion and Costume Design
- Degree Programme in Interior Architecture and Furniture Design
Teachers
- Iida Silvennoinen
- Seija Kiuru-Lavaste
Teacher in charge
Seija Kiuru-Lavaste
Groups
-
MPKV22KPFashion and costume design, full-time studies
Objective
General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.
The content of courses included in the module vary, depending on the field of study.
Content
How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?
Evaluation scale
1-5
Enrollment
03.01.2022 - 16.01.2022
Timing
01.01.2022 - 01.05.2022
Number of ECTS credits allocated
10 op
Mode of delivery
Contact teaching
Campus
Kouvola Campus
Teaching languages
- Finnish
Seats
22 - 25
Degree programmes
- Degree Programme in Bioproduct Design
- Degree Programme in Fashion and Costume Design
- Degree Programme in Interior Architecture and Furniture Design
Teachers
- Joni Yrjönen
- Tommi Rintamäki
Teacher in charge
Tommi Rintamäki
Groups
-
BTMKV22KPBioproduct design, full-time studies
Objective
General learning outcomes
- accepted completion of the course in each material workshop gives the right to work independently at the workshops.
- you can use the machines, equipment and hand tools of the workshops.
- you are able to make an active contribution to the development of the working environment.
- you are familiar with the structure, properties and ways of working in the workshop in question.
- you are able to identify the most common materials and their basic properties.
- you learn to follow development in the field and can continuously develop your material skills.
The content of courses included in the module vary, depending on the field of study.
Content
How to use tools, machines and devices safely and keep them in good condition?
How to identify the most important properties of materials?
How to design aesthetic and suitable objects and products while using material responsibly?
Materials
Available in Learn platform.
Teaching methods
Xamk offers its students an opportunity to pursue studies flexibly to suit their various life situations. Students can choose between three learning routes: a learning route based on a working week, a learning route that accelerates the studies, and a work-based learning route.
A learning route based on a working week according to timetable.
Employer connections
Possible working life oriented excercise, in which assignment from external cooperation company.
Student workload
5cr is 135h where contact teaching is 70h and independence working is 65h
Further information
Learning tasks which are related to the subject will be carried out in the study module.
Evaluation scale
1-5
Assessment methods and criteria
Student's self-reflection and peer evaluation
Active participation and approved assignments