Materials and manufacturing technologyLaajuus (5 cr)
Code: EN00BH34
Credits
5 op
Teaching language
- Finnish
Responsible person
- Kalle Tarhonen
Objective
After completing the course, you will be able to:
identify the general structural materials of metal products
explain the general manufacturing methods of metal products
present the technical properties of structural materials for manufacturing
choose the suitable material to the target
identify the most important machine tools and hand tools of metal products
use machine tools and hand tools safely
use different welding methods safely
Content
What kind of materials are used in the structures of the metal products, machine parts and machines?
How are the metal products made?
What technical properties and processing properties are required from the production materials of the metal product and how can the properties of the metal be influenced with heat treatment?
How do I choose a suitable material for the separate targets?
What kind of tools and machine tools are used for the making of metal products?
How do I operate machine tools and tools safely?
What welding methods exist, what are their special characteristics ,and how to weld safely?
Materials
Occupational safety
Enrollment
08.04.2024 - 21.04.2024
Timing
02.09.2024 - 20.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kotka Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Energy Engineering
Teachers
- Esa Huuhtanen
- Kalle Tarhonen
Teacher in charge
Kalle Tarhonen
Groups
-
ENKT24SPEnergy engineering, full-time studies
Objective
After completing the course, you will be able to:
identify the general structural materials of metal products
explain the general manufacturing methods of metal products
present the technical properties of structural materials for manufacturing
choose the suitable material to the target
identify the most important machine tools and hand tools of metal products
use machine tools and hand tools safely
use different welding methods safely
Content
What kind of materials are used in the structures of the metal products, machine parts and machines?
How are the metal products made?
What technical properties and processing properties are required from the production materials of the metal product and how can the properties of the metal be influenced with heat treatment?
How do I choose a suitable material for the separate targets?
What kind of tools and machine tools are used for the making of metal products?
How do I operate machine tools and tools safely?
What welding methods exist, what are their special characteristics ,and how to weld safely?
Evaluation scale
1-5
Enrollment
21.08.2023 - 01.09.2023
Timing
04.09.2023 - 15.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
10 - 50
Degree programmes
- Degree Programme in Energy Engineering
Teachers
- Esa Huuhtanen
- Kalle Tarhonen
Teacher in charge
Kalle Tarhonen
Groups
-
ENKT23SPEnergy engineering, full-time studies
Objective
After completing the course, you will be able to:
identify the general structural materials of metal products
explain the general manufacturing methods of metal products
present the technical properties of structural materials for manufacturing
choose the suitable material to the target
identify the most important machine tools and hand tools of metal products
use machine tools and hand tools safely
use different welding methods safely
Content
What kind of materials are used in the structures of the metal products, machine parts and machines?
How are the metal products made?
What technical properties and processing properties are required from the production materials of the metal product and how can the properties of the metal be influenced with heat treatment?
How do I choose a suitable material for the separate targets?
What kind of tools and machine tools are used for the making of metal products?
How do I operate machine tools and tools safely?
What welding methods exist, what are their special characteristics ,and how to weld safely?
Materials
Material that is distributed in classroom and in moodle.
- Koivisto et al, Konetekniikan materiaalioppi
- Ihalainen et al, Valmistustekniikka
Teaching methods
Scheduled track:
Theory lectures and excercises. Mandatory laboratory excercises.
Independent track:
If you are working a company that is in the similar industry, you can make a a larger development project within your company, which is graded and replaces the excercises within the course. Additionally you have to take the tests in the course. Please contact the lecturer on the start of the course.
Exam schedules
Exams to upgrade grading must be taken within one year from the end of the course. These exams are to be taken in predetermined days, which are given in the first lecture.
Completion alternatives
If you are working a company that is in the similar industry, you can make a a larger development project within your company, which is graded and replaces the excercises within the course. Additionally you have to take the tests in the course. Please contact the lecturer on the start of the course.
Student workload
Theory + laboratory excercises (60h) Excercises to be done in home (60 h)
Further information
Participation in first classroom lecture is mandatory. If student can't participate for some good reason He/She must contact the teacher before the first lecture.
More detailed description and schedule of the course will be told in the first lecture.
Evaluation scale
1-5
Assessment methods and criteria
Approved excercises and exam.
Enrollment
02.01.2023 - 15.01.2023
Timing
09.01.2023 - 26.05.2023
Number of ECTS credits allocated
5 op
Virtual portion
3 op
Mode of delivery
40 % Contact teaching, 60 % Distance learning
Campus
Kotka Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Energy Engineering
Teachers
- Esa Huuhtanen
- Kalle Tarhonen
Teacher in charge
Kalle Tarhonen
Groups
-
ENKT23KMEnergy engineering, part-time studies
Objective
After completing the course, you will be able to:
identify the general structural materials of metal products
explain the general manufacturing methods of metal products
present the technical properties of structural materials for manufacturing
choose the suitable material to the target
identify the most important machine tools and hand tools of metal products
use machine tools and hand tools safely
use different welding methods safely
Content
What kind of materials are used in the structures of the metal products, machine parts and machines?
How are the metal products made?
What technical properties and processing properties are required from the production materials of the metal product and how can the properties of the metal be influenced with heat treatment?
How do I choose a suitable material for the separate targets?
What kind of tools and machine tools are used for the making of metal products?
How do I operate machine tools and tools safely?
What welding methods exist, what are their special characteristics ,and how to weld safely?
Materials
Material that is distributed in classroom and in moodle.
- Koivisto et al, Konetekniikan materiaalioppi
- Ihalainen et al, Valmistustekniikka
Teaching methods
Scheduled track:
Theory lectures and excercises. Mandatory laboratory excercises.
Independent track:
If you are working a company that is in the similar industry, you can make a a larger development project within your company, which is graded and replaces the excercises within the course. Additionally you have to take the tests in the course. Please contact the lecturer on the start of the course.
Exam schedules
Exams to upgrade grading must be taken within one year from the end of the course. These exams are to be taken in predetermined days, which are given in the first lecture.
Completion alternatives
If you are working a company that is in the similar industry, you can make a a larger development project within your company, which is graded and replaces the excercises within the course. Additionally you have to take the tests in the course. Please contact the lecturer on the start of the course.
Student workload
Theory + laboratory excercises (60h) Excercises to be done in home (60 h)
Further information
Participation in first classroom lecture is mandatory. If student can't participate for some good reason He/She must contact the teacher before the first lecture.
More detailed description and schedule of the course will be told in the first lecture.
Evaluation scale
1-5
Assessment methods and criteria
Approved excercises and exam.
Enrollment
22.08.2022 - 28.08.2022
Timing
29.08.2022 - 16.12.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
10 - 50
Degree programmes
- Degree Programme in Energy Engineering
Teachers
- Esa Huuhtanen
- Kalle Tarhonen
Teacher in charge
Kalle Tarhonen
Groups
-
ENKT22SPEnergy engineering, full-time studies
Objective
After completing the course, you will be able to:
identify the general structural materials of metal products
explain the general manufacturing methods of metal products
present the technical properties of structural materials for manufacturing
choose the suitable material to the target
identify the most important machine tools and hand tools of metal products
use machine tools and hand tools safely
use different welding methods safely
Content
What kind of materials are used in the structures of the metal products, machine parts and machines?
How are the metal products made?
What technical properties and processing properties are required from the production materials of the metal product and how can the properties of the metal be influenced with heat treatment?
How do I choose a suitable material for the separate targets?
What kind of tools and machine tools are used for the making of metal products?
How do I operate machine tools and tools safely?
What welding methods exist, what are their special characteristics ,and how to weld safely?
Materials
Material that is distributed in classroom and in moodle.
- Koivisto et al, Konetekniikan materiaalioppi
- Ihalainen et al, Valmistustekniikka
Teaching methods
Scheduled track:
Theory lectures and excercises. Mandatory laboratory excercises.
Independent track:
If you are working a company that is in the similar industry, you can make a a larger development project within your company, which is graded and replaces the excercises within the course. Additionally you have to take the tests in the course. Please contact the lecturer on the start of the course.
Exam schedules
Exams to upgrade grading must be taken within one year from the end of the course. These exams are to be taken in predetermined days, which are given in the first lecture.
Completion alternatives
If you are working a company that is in the similar industry, you can make a a larger development project within your company, which is graded and replaces the excercises within the course. Additionally you have to take the tests in the course. Please contact the lecturer on the start of the course.
Student workload
Theory + laboratory excercises (60h) Excercises to be done in home (60 h)
Further information
Participation in first classroom lecture is mandatory. If student can't participate for some good reason He/She must contact the teacher before the first lecture.
More detailed description and schedule of the course will be told in the first lecture.
Evaluation scale
1-5
Assessment methods and criteria
Approved excercises and exam.