Automation technologyLaajuus (5 cr)
Code: ST00BH28
Credits
5 op
Objective
After completing the course students are familiar with automation devices and their use in the process management, command a variety of measurement methods and understand the basics of the closed control system. The course also includes thorough information about automation technology, sensors, various types of physical quantities, measurements and analog measurement signal processing.
Content
How do sensors work?
What do digital and analog input mean?
How do buses work in automation systems?
How do control functions work (PID)?
How are actuators controlled?
Qualifications
electronics
Materials
Automation design, Programmable logic controllers, Building automation
Enrollment
06.11.2023 - 17.11.2023
Timing
01.01.2024 - 28.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
16 - 24
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Risto Kuitunen
Groups
-
STMI23SPBElectrical and Automation Engineering, full-time studies
Objective
After completing the course students are familiar with automation devices and their use in the process management, command a variety of measurement methods and understand the basics of the closed control system. The course also includes thorough information about automation technology, sensors, various types of physical quantities, measurements and analog measurement signal processing.
Content
How do sensors work?
What do digital and analog input mean?
How do buses work in automation systems?
How do control functions work (PID)?
How are actuators controlled?
Evaluation scale
1-5
Qualifications
electronics
Enrollment
06.11.2023 - 17.11.2023
Timing
01.01.2024 - 29.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
16 - 24
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Risto Kuitunen
Groups
-
STMI23SPAElectrical and Automation Engineering, full-time studies
Objective
After completing the course students are familiar with automation devices and their use in the process management, command a variety of measurement methods and understand the basics of the closed control system. The course also includes thorough information about automation technology, sensors, various types of physical quantities, measurements and analog measurement signal processing.
Content
How do sensors work?
What do digital and analog input mean?
How do buses work in automation systems?
How do control functions work (PID)?
How are actuators controlled?
Evaluation scale
1-5
Qualifications
electronics
Enrollment
07.11.2022 - 18.11.2022
Timing
03.01.2023 - 05.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Mika Ruponen
Groups
-
STMI22SPAElectrical and Automation Engineering, full-time studies
Objective
After completing the course students are familiar with automation devices and their use in the process management, command a variety of measurement methods and understand the basics of the closed control system. The course also includes thorough information about automation technology, sensors, various types of physical quantities, measurements and analog measurement signal processing.
Content
How do sensors work?
What do digital and analog input mean?
How do buses work in automation systems?
How do control functions work (PID)?
How are actuators controlled?
Evaluation scale
1-5
Qualifications
electronics
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 26.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
- Jyrki Liikanen
Teacher in charge
Mika Ruponen
Groups
-
STMI22SMElectrical and Automation Engineering, part-time studies
Objective
After completing the course students are familiar with automation devices and their use in the process management, command a variety of measurement methods and understand the basics of the closed control system. The course also includes thorough information about automation technology, sensors, various types of physical quantities, measurements and analog measurement signal processing.
Content
How do sensors work?
What do digital and analog input mean?
How do buses work in automation systems?
How do control functions work (PID)?
How are actuators controlled?
Evaluation scale
1-5
Qualifications
electronics
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 29.04.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Risto Kuitunen
Groups
-
STMI22SPBElectrical and Automation Engineering, full-time studies
Objective
After completing the course students are familiar with automation devices and their use in the process management, command a variety of measurement methods and understand the basics of the closed control system. The course also includes thorough information about automation technology, sensors, various types of physical quantities, measurements and analog measurement signal processing.
Content
How do sensors work?
What do digital and analog input mean?
How do buses work in automation systems?
How do control functions work (PID)?
How are actuators controlled?
Evaluation scale
1-5
Qualifications
electronics
Enrollment
08.11.2021 - 21.11.2021
Timing
01.01.2022 - 01.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
15 - 30
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Risto Kuitunen
Scheduling groups
- Ryhmä A (Size: 0. Open UAS: 0.)
- Ryhmä B (Size: 0. Open UAS: 0.)
Groups
-
STMI21SPAElectrical and Automation Engineering, full-time studies
Small groups
- Ryhmä A
- Ryhmä B
Objective
After completing the course students are familiar with automation devices and their use in the process management, command a variety of measurement methods and understand the basics of the closed control system. The course also includes thorough information about automation technology, sensors, various types of physical quantities, measurements and analog measurement signal processing.
Content
How do sensors work?
What do digital and analog input mean?
How do buses work in automation systems?
How do control functions work (PID)?
How are actuators controlled?
Evaluation scale
1-5
Qualifications
electronics
Enrollment
08.11.2021 - 21.11.2021
Timing
01.01.2022 - 01.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
15 - 30
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Risto Kuitunen
Scheduling groups
- Ryhmä A (Size: 0. Open UAS: 0.)
- Ryhmä B (Size: 0. Open UAS: 0.)
Groups
-
STMI21SPBElectrical and Automation Engineering, full-time studies
Small groups
- Ryhmä A
- Ryhmä B
Objective
After completing the course students are familiar with automation devices and their use in the process management, command a variety of measurement methods and understand the basics of the closed control system. The course also includes thorough information about automation technology, sensors, various types of physical quantities, measurements and analog measurement signal processing.
Content
How do sensors work?
What do digital and analog input mean?
How do buses work in automation systems?
How do control functions work (PID)?
How are actuators controlled?
Evaluation scale
1-5
Qualifications
electronics