Design and dimensioning of heating systemsLaajuus (5 cr)
Code: TT00BA33
Credits
5 op
Teaching language
- Finnish
Responsible person
- Jarkko Kolehmainen
Objective
1. You can use the vocabulary and concepts related to heat sources, different heating systems and their parts in buildings in a proficient way.
2. You can justify the selection of heat sources and heat emitters and their importance in the designing phase by your expertise from the perspective of good thermal comfort conditions and energy efficiency.
3.You can select and dimension functional heating systems, heat distribution and control of heating power based on your heat demand calculations and you can balance heat distribution to meet the requirements of good thermal comfort and energy efficiency in buildings.
Content
*How is the calculated heat demand distributed to different heat emitters in rooms and facilities?
*How is the distribution network and its equipment dimensioned?
*How are the circulation pump head and flow rate calculated and how is an energy efficient pump selected?
*How is the heating power regulated to meet momentary heat demand with control valves?
*How is the heat distribution balanced with the help of pressure loss calculations?
*How is the heating system equipped with correct safety and expansion devices?
*How are the different parts of heating systems connected together to make a functioning whole?
Qualifications
the course of Heating systems and heat demand calculation
Enrollment
04.11.2024 - 17.11.2024
Timing
13.01.2025 - 25.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Jarkko Kolehmainen
Teacher in charge
Jarkko Kolehmainen
Scheduling groups
- Ryhmä A (Size: 0. Open UAS: 0.)
- Ryhmä B (Size: 0. Open UAS: 0.)
Groups
-
TTMI23SPBuilding Services Engineering, full-time studies
Small groups
- Ryhmä A
- Ryhmä B
Objective
1. You can use the vocabulary and concepts related to heat sources, different heating systems and their parts in buildings in a proficient way.
2. You can justify the selection of heat sources and heat emitters and their importance in the designing phase by your expertise from the perspective of good thermal comfort conditions and energy efficiency.
3.You can select and dimension functional heating systems, heat distribution and control of heating power based on your heat demand calculations and you can balance heat distribution to meet the requirements of good thermal comfort and energy efficiency in buildings.
Content
*How is the calculated heat demand distributed to different heat emitters in rooms and facilities?
*How is the distribution network and its equipment dimensioned?
*How are the circulation pump head and flow rate calculated and how is an energy efficient pump selected?
*How is the heating power regulated to meet momentary heat demand with control valves?
*How is the heat distribution balanced with the help of pressure loss calculations?
*How is the heating system equipped with correct safety and expansion devices?
*How are the different parts of heating systems connected together to make a functioning whole?
Opiskelumateriaali
Opiskelumateriaali jaetaan toteutuksen aikana/julkaistaan Learn-ympäristössä opintojakson alkaessa
Yksilölliset oppimisväylät
• Opetus toteutetaan kokonaan lähiopetuksena Mikkelin kampuksella lukujärjestyksen mukaan. Etäosallistuminen ei ole mahdollista.
• Opiskelu rytmittyy työjärjestyksen mukaisten ryhmätapaamisten ja itsenäisesti tehtävien/ryhmässä tehtävien oppimistehtävien mukaan.
• Opettajan ohjausta on saatavilla lähituntien yhteydessä.
• Arvioitavat tehtävät tehdään itsenäisesti/paritöinä.
TKI ja työelämäyhteistyö
Opintojaksolla ei ole työelämäyhteistyötä.
Tentit ja muut määräajat
Opintojaksolla on palautettavia oppimistehtäviä ja tentti, aikataulut sovitaan toteutuksen alkaessa.
Opintojakso päättyy toteutuksen tiedoissa ilmoitettuna aikana, johon mennessä opiskelija on palauttanut suoritukseen vaadittavat harjoitustehtävät, suorittanut mahdolliset tentit ja täyttänyt muut hyväksytyn suorituksen vaatimukset.
Opiskelijan työmäärä
• 1 op vastaa noin 27 tuntia opiskelijan työtä. Työmäärä kuitenkin riippuu opiskelutaidoista ja aiemmasta osaamisesta.
• 5 op:n opintojaksolla opiskelijan työmäärä on n. 135 t.
Evaluation scale
1-5
Assessment methods and criteria
Arviointi tehdään suhteessa opintojakson osaamistavoitteisiin ja arviointikriteereihin. Opintojakson hyväksytty suorittaminen edellyttää oppimistehtävien ja tentin tekemistä hyväksytyllä arvosanalla.
Opintojakso arvioidaan asteikolla 0–5.
Qualifications
the course of Heating systems and heat demand calculation
Enrollment
08.04.2024 - 21.04.2024
Timing
02.09.2024 - 20.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Jarkko Kolehmainen
Teacher in charge
Jarkko Kolehmainen
Groups
-
TTMI23KMBuilding Services Engineering, part-time studies
Objective
1. You can use the vocabulary and concepts related to heat sources, different heating systems and their parts in buildings in a proficient way.
2. You can justify the selection of heat sources and heat emitters and their importance in the designing phase by your expertise from the perspective of good thermal comfort conditions and energy efficiency.
3.You can select and dimension functional heating systems, heat distribution and control of heating power based on your heat demand calculations and you can balance heat distribution to meet the requirements of good thermal comfort and energy efficiency in buildings.
Content
*How is the calculated heat demand distributed to different heat emitters in rooms and facilities?
*How is the distribution network and its equipment dimensioned?
*How are the circulation pump head and flow rate calculated and how is an energy efficient pump selected?
*How is the heating power regulated to meet momentary heat demand with control valves?
*How is the heat distribution balanced with the help of pressure loss calculations?
*How is the heating system equipped with correct safety and expansion devices?
*How are the different parts of heating systems connected together to make a functioning whole?
Opiskelumateriaali
Opiskelumateriaali ilmoitetaan/jaetaan opintojakson alkaessa.
Yksilölliset oppimisväylät
Työviikkopohjainen oppimisväylä
Osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelusi rytmittyvät työjärjestyksen mukaisten ryhmätapaamisten ja itsenäisesti tehtävien oppimistehtävien mukaan.
TKI ja työelämäyhteistyö
Ei ole
Opiskelijan työmäärä
Lähiopetusta noin 40 tuntia, opiskelijan kokonaistyömäärä noin 135 tuntia
Evaluation scale
1-5
Assessment methods and criteria
Tentit ja arvioitavat harjoitustehtävät
Qualifications
the course of Heating systems and heat demand calculation
Enrollment
06.11.2023 - 17.11.2023
Timing
08.01.2024 - 30.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Jarkko Kolehmainen
Teacher in charge
Jarkko Kolehmainen
Scheduling groups
- Pienryhmä a (Size: 0. Open UAS: 0.)
- Pienryhmä b (Size: 0. Open UAS: 0.)
Groups
-
TTMI22SPBuilding Services Engineering, full-time studies
Small groups
- 1
- 2
Objective
1. You can use the vocabulary and concepts related to heat sources, different heating systems and their parts in buildings in a proficient way.
2. You can justify the selection of heat sources and heat emitters and their importance in the designing phase by your expertise from the perspective of good thermal comfort conditions and energy efficiency.
3.You can select and dimension functional heating systems, heat distribution and control of heating power based on your heat demand calculations and you can balance heat distribution to meet the requirements of good thermal comfort and energy efficiency in buildings.
Content
*How is the calculated heat demand distributed to different heat emitters in rooms and facilities?
*How is the distribution network and its equipment dimensioned?
*How are the circulation pump head and flow rate calculated and how is an energy efficient pump selected?
*How is the heating power regulated to meet momentary heat demand with control valves?
*How is the heat distribution balanced with the help of pressure loss calculations?
*How is the heating system equipped with correct safety and expansion devices?
*How are the different parts of heating systems connected together to make a functioning whole?
Opiskelumateriaali
Opiskelumateriaali ilmoitetaan/jaetaan opintojakson alkaessa.
Yksilölliset oppimisväylät
Työviikkopohjainen oppimisväylä
Osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelusi rytmittyvät työjärjestyksen mukaisten ryhmätapaamisten ja itsenäisesti tehtävien oppimistehtävien mukaan.
TKI ja työelämäyhteistyö
Ei ole
Opiskelijan työmäärä
Lähiopetusta noin 60 tuntia, opiskelijan kokonaistyömäärä noin 135 tuntia.
Evaluation scale
1-5
Assessment methods and criteria
Tentit ja arvioitavat harjoitustehtävät
Qualifications
the course of Heating systems and heat demand calculation
Enrollment
07.11.2022 - 18.11.2022
Timing
09.01.2023 - 31.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Jarkko Kolehmainen
Teacher in charge
Jarkko Kolehmainen
Scheduling groups
- Pienryhmä a (Size: 20. Open UAS: 0.)
- Pienryhmä b (Size: 20. Open UAS: 0.)
Groups
-
TTMI21SPBuilding Services Engineering, full-time studies
Small groups
- Pienryhmä a
- Pienryhmä b
Objective
1. You can use the vocabulary and concepts related to heat sources, different heating systems and their parts in buildings in a proficient way.
2. You can justify the selection of heat sources and heat emitters and their importance in the designing phase by your expertise from the perspective of good thermal comfort conditions and energy efficiency.
3.You can select and dimension functional heating systems, heat distribution and control of heating power based on your heat demand calculations and you can balance heat distribution to meet the requirements of good thermal comfort and energy efficiency in buildings.
Content
*How is the calculated heat demand distributed to different heat emitters in rooms and facilities?
*How is the distribution network and its equipment dimensioned?
*How are the circulation pump head and flow rate calculated and how is an energy efficient pump selected?
*How is the heating power regulated to meet momentary heat demand with control valves?
*How is the heat distribution balanced with the help of pressure loss calculations?
*How is the heating system equipped with correct safety and expansion devices?
*How are the different parts of heating systems connected together to make a functioning whole?
Opiskelumateriaali
Opiskelumateriaali ilmoitetaan/jaetaan opintojakson alkaessa.
Yksilölliset oppimisväylät
Työviikkopohjainen oppimisväylä
Osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelusi rytmittyvät työjärjestyksen mukaisten ryhmätapaamisten ja itsenäisesti tehtävien oppimistehtävien mukaan.
TKI ja työelämäyhteistyö
Ei ole
Opiskelijan työmäärä
Lähiopetusta noin 60 tuntia, opiskelijan kokonaistyömäärä noin 135 tuntia.
Evaluation scale
1-5
Assessment methods and criteria
Tentit ja arvioitavat harjoitustehtävät
Qualifications
the course of Heating systems and heat demand calculation
Enrollment
07.11.2022 - 18.11.2022
Timing
09.01.2023 - 31.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Jarkko Kolehmainen
Teacher in charge
Jarkko Kolehmainen
Groups
-
TTMI21SMBuilding Services Engineering, part-time studies
Objective
1. You can use the vocabulary and concepts related to heat sources, different heating systems and their parts in buildings in a proficient way.
2. You can justify the selection of heat sources and heat emitters and their importance in the designing phase by your expertise from the perspective of good thermal comfort conditions and energy efficiency.
3.You can select and dimension functional heating systems, heat distribution and control of heating power based on your heat demand calculations and you can balance heat distribution to meet the requirements of good thermal comfort and energy efficiency in buildings.
Content
*How is the calculated heat demand distributed to different heat emitters in rooms and facilities?
*How is the distribution network and its equipment dimensioned?
*How are the circulation pump head and flow rate calculated and how is an energy efficient pump selected?
*How is the heating power regulated to meet momentary heat demand with control valves?
*How is the heat distribution balanced with the help of pressure loss calculations?
*How is the heating system equipped with correct safety and expansion devices?
*How are the different parts of heating systems connected together to make a functioning whole?
Opiskelumateriaali
Opiskelumateriaali ilmoitetaan/jaetaan opintojakson alkaessa.
Yksilölliset oppimisväylät
Työviikkopohjainen oppimisväylä
Osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelusi rytmittyvät työjärjestyksen mukaisten ryhmätapaamisten ja itsenäisesti tehtävien oppimistehtävien mukaan.
TKI ja työelämäyhteistyö
Ei ole
Opiskelijan työmäärä
Lähiopetusta noin 40 tuntia, opiskelijan kokonaistyömäärä noin 135 tuntia
Evaluation scale
1-5
Assessment methods and criteria
Tentit ja arvioitavat harjoitustehtävät
Qualifications
the course of Heating systems and heat demand calculation
Enrollment
08.11.2021 - 21.11.2021
Timing
10.01.2022 - 30.04.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Jarkko Kolehmainen
Teacher in charge
Jarkko Kolehmainen
Scheduling groups
- Ryhmä A (Size: 0. Open UAS: 0.)
- Ryhmä B (Size: 0. Open UAS: 0.)
Groups
-
TTMI20SPBuilding Services Engineering, full-time studies
Small groups
- Ryhmä A
- Ryhmä B
Objective
1. You can use the vocabulary and concepts related to heat sources, different heating systems and their parts in buildings in a proficient way.
2. You can justify the selection of heat sources and heat emitters and their importance in the designing phase by your expertise from the perspective of good thermal comfort conditions and energy efficiency.
3.You can select and dimension functional heating systems, heat distribution and control of heating power based on your heat demand calculations and you can balance heat distribution to meet the requirements of good thermal comfort and energy efficiency in buildings.
Content
*How is the calculated heat demand distributed to different heat emitters in rooms and facilities?
*How is the distribution network and its equipment dimensioned?
*How are the circulation pump head and flow rate calculated and how is an energy efficient pump selected?
*How is the heating power regulated to meet momentary heat demand with control valves?
*How is the heat distribution balanced with the help of pressure loss calculations?
*How is the heating system equipped with correct safety and expansion devices?
*How are the different parts of heating systems connected together to make a functioning whole?
Opiskelumateriaali
Opiskelumateriaali ilmoitetaan/jaetaan opintojakson alkaessa.
Yksilölliset oppimisväylät
Työviikkopohjainen oppimisväylä
Osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelusi rytmittyvät työjärjestyksen mukaisten ryhmätapaamisten ja itsenäisesti tehtävien oppimistehtävien mukaan.
TKI ja työelämäyhteistyö
Ei ole
Opiskelijan työmäärä
Lähiopetusta noin 60 tuntia, opiskelijan kokonaistyömäärä noin 135 tuntia.
Evaluation scale
1-5
Assessment methods and criteria
Tentit ja arvioitavat harjoitustehtävät
Qualifications
the course of Heating systems and heat demand calculation
Enrollment
08.11.2021 - 21.11.2021
Timing
03.01.2022 - 30.04.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Jarkko Kolehmainen
Teacher in charge
Jarkko Kolehmainen
Groups
-
TTMI20SMBuilding Services Engineering, part-time studies
Objective
1. You can use the vocabulary and concepts related to heat sources, different heating systems and their parts in buildings in a proficient way.
2. You can justify the selection of heat sources and heat emitters and their importance in the designing phase by your expertise from the perspective of good thermal comfort conditions and energy efficiency.
3.You can select and dimension functional heating systems, heat distribution and control of heating power based on your heat demand calculations and you can balance heat distribution to meet the requirements of good thermal comfort and energy efficiency in buildings.
Content
*How is the calculated heat demand distributed to different heat emitters in rooms and facilities?
*How is the distribution network and its equipment dimensioned?
*How are the circulation pump head and flow rate calculated and how is an energy efficient pump selected?
*How is the heating power regulated to meet momentary heat demand with control valves?
*How is the heat distribution balanced with the help of pressure loss calculations?
*How is the heating system equipped with correct safety and expansion devices?
*How are the different parts of heating systems connected together to make a functioning whole?
Opiskelumateriaali
Opiskelumateriaali ilmoitetaan/jaetaan opintojakson alkaessa.
Yksilölliset oppimisväylät
Työviikkopohjainen oppimisväylä
Osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelusi rytmittyvät työjärjestyksen mukaisten ryhmätapaamisten ja itsenäisesti tehtävien oppimistehtävien mukaan.
TKI ja työelämäyhteistyö
Ei ole
Opiskelijan työmäärä
Lähiopetusta noin 40 tuntia, opiskelijan kokonaistyömäärä noin 135 tuntia
Evaluation scale
1-5
Assessment methods and criteria
Tentit ja arvioitavat harjoitustehtävät
Qualifications
the course of Heating systems and heat demand calculation