Laboratory course in marine electrical engineeringLaajuus (2 cr)
Code: MI00DR87
Credits
2 op
Teaching language
- Finnish
Objective
Knowledge and understanding of and proficiency in:
- make connections and installations of more conventional equipment and appliances for marine electrical engineering in a safe and consistent manner
- Identify basic components, methods of installation and working methods in the field
- present the results of the laboratory work in writing and draw conclusions from them
Content
- the use and coupling of measuring devices to the device or phenomenon being measured
- knowledge of safe working, making connections and joints, checking your own work, occupational safety
- compiling reports on the measurements made
(STCW A-III / 1 and A-III / 2)
Qualifications
Marine electrical engineering
Materials
Approved training during studies
Further information
Participation in all lessons and training sessions is obligatory.
Enrollment
04.11.2024 - 17.11.2024
Timing
14.04.2025 - 01.06.2025
Number of ECTS credits allocated
2 op
Mode of delivery
Contact teaching
Unit
Department of Logistics and Marine Technology
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
12 - 30
Degree programmes
- Degree Programme in Marine Engineering, Ship Technology
Teachers
- Matti Hänninen
- José Hernández
Teacher in charge
José Hernández
Groups
-
MIKT23SPMarine Engineering, full-time studies
Objective
Knowledge and understanding of and proficiency in:
- make connections and installations of more conventional equipment and appliances for marine electrical engineering in a safe and consistent manner
- Identify basic components, methods of installation and working methods in the field
- present the results of the laboratory work in writing and draw conclusions from them
Content
- the use and coupling of measuring devices to the device or phenomenon being measured
- knowledge of safe working, making connections and joints, checking your own work, occupational safety
- compiling reports on the measurements made
(STCW A-III / 1 and A-III / 2)
Opiskelumateriaali
Material shared at lectures and tasks.
Yksilölliset oppimisväylät
Scheduled track:
You will attend teaching and guidance sessions as specified in the schedule.
Lectures, tasks, web tasks and possible laboratory work.
Independent track:
n/a
Blended track:
Discussion with the teacher and, where appropriate, PSP-planning with your own mentor teacher.
TKI ja työelämäyhteistyö
This course does not include RDI and work-related cooperation
Evaluation scale
Approved/Failed
Assessment methods and criteria
Course is graded based on the laboratory works conducted and the report prepared consisting the essentials of the laboratory works.
Qualifications
Marine electrical engineering
Further information
Participation in all lessons and training sessions is obligatory.
Enrollment
06.11.2023 - 17.11.2023
Timing
15.04.2024 - 31.05.2024
Number of ECTS credits allocated
2 op
Mode of delivery
Contact teaching
Unit
Department of Logistics and Marine Technology
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
12 - 30
Degree programmes
- Degree Programme in Marine Engineering, Ship Technology
Teachers
- Matti Hänninen
- José Hernández
Teacher in charge
José Hernández
Groups
-
MIKT22SPMarine Engineering, full-time studies
Objective
Knowledge and understanding of and proficiency in:
- make connections and installations of more conventional equipment and appliances for marine electrical engineering in a safe and consistent manner
- Identify basic components, methods of installation and working methods in the field
- present the results of the laboratory work in writing and draw conclusions from them
Content
- the use and coupling of measuring devices to the device or phenomenon being measured
- knowledge of safe working, making connections and joints, checking your own work, occupational safety
- compiling reports on the measurements made
(STCW A-III / 1 and A-III / 2)
Opiskelumateriaali
Material shared at lectures and tasks.
Yksilölliset oppimisväylät
Scheduled track:
You will attend teaching and guidance sessions as specified in the schedule.
Lectures, tasks, web tasks and possible laboratory work.
Independent track:
n/a
Blended track:
Discussion with the teacher and, where appropriate, PSP-planning with your own mentor teacher.
TKI ja työelämäyhteistyö
This course does not include RDI and work-related cooperation
Evaluation scale
Approved/Failed
Assessment methods and criteria
Course is graded based on the laboratory works conducted and the report prepared consisting the essentials of the laboratory works.
Qualifications
Marine electrical engineering
Further information
Participation in all lessons and training sessions is obligatory.
Enrollment
07.11.2022 - 18.11.2022
Timing
17.04.2023 - 04.06.2023
Number of ECTS credits allocated
2 op
Mode of delivery
Contact teaching
Unit
Department of Logistics and Marine Technology
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
12 - 30
Degree programmes
- Degree Programme in Marine Engineering
Teachers
- Matti Hänninen
- José Hernández
Groups
-
MIKT21SPMarine Engineering, full-time studies
Objective
Knowledge and understanding of and proficiency in:
- make connections and installations of more conventional equipment and appliances for marine electrical engineering in a safe and consistent manner
- Identify basic components, methods of installation and working methods in the field
- present the results of the laboratory work in writing and draw conclusions from them
Content
- the use and coupling of measuring devices to the device or phenomenon being measured
- knowledge of safe working, making connections and joints, checking your own work, occupational safety
- compiling reports on the measurements made
(STCW A-III / 1 and A-III / 2)
Opiskelumateriaali
Material shared at lectures and tasks.
Yksilölliset oppimisväylät
Scheduled track:
You will attend teaching and guidance sessions as specified in the schedule.
Lectures, tasks, web tasks and possible laboratory work.
Independent track:
n/a
Blended track:
Discussion with the teacher and, where appropriate, PSP-planning with your own mentor teacher.
TKI ja työelämäyhteistyö
This course does not include RDI and work-related cooperation
Evaluation scale
Approved/Failed
Assessment methods and criteria
Course is graded based on the laboratory works conducted and the report prepared consisting the essentials of the laboratory works.
Qualifications
Marine electrical engineering
Further information
Participation in all lessons and training sessions is obligatory.
Enrollment
08.11.2021 - 21.11.2021
Timing
19.04.2022 - 05.06.2022
Number of ECTS credits allocated
2 op
Mode of delivery
Contact teaching
Unit
Department of Logistics and Marine Technology
Campus
Kotka Campus
Teaching languages
- Finnish
Seats
12 - 30
Degree programmes
- Degree Programme in Marine Engineering
Teachers
- Kalle Suoniemi
- José Hernández
Teacher in charge
Kalle Suoniemi
Groups
-
MIKT20SPDegree Programme in Marine Engineering, full-time studies
Objective
Knowledge and understanding of and proficiency in:
- make connections and installations of more conventional equipment and appliances for marine electrical engineering in a safe and consistent manner
- Identify basic components, methods of installation and working methods in the field
- present the results of the laboratory work in writing and draw conclusions from them
Content
- the use and coupling of measuring devices to the device or phenomenon being measured
- knowledge of safe working, making connections and joints, checking your own work, occupational safety
- compiling reports on the measurements made
(STCW A-III / 1 and A-III / 2)
Opiskelumateriaali
Material shared at lectures and tasks.
Yksilölliset oppimisväylät
Scheduled track:
You will attend teaching and guidance sessions as specified in the schedule.
Lectures, tasks, web tasks and possible laboratory work.
Independent track:
n/a
Blended track:
Discussion with the teacher and, where appropriate, PSP-planning with your own mentor teacher.
TKI ja työelämäyhteistyö
This course does not include RDI and work-related cooperation
Evaluation scale
Approved/Failed
Assessment methods and criteria
Course is graded based on the laboratory works conducted and the report prepared consisting the essentials of the laboratory works.
Qualifications
Marine electrical engineering
Further information
Participation in all lessons and training sessions is obligatory.