Embedded automationLaajuus (5 cr)
Code: ST00BH15
Credits
5 op
Objective
You familiarize yourself with programmable microcontrollers. You understand the difference between analog and digital information in terms of microcontroller interfaces. You can connect different sensors to microcontrollers and you can fit devices with different voltage levels to controllers. You know how to use the C programming language to gather data from sensors and you can save and edit it.
Content
How does a microcontroller work? What is the difference between analog and digital signal processing with controllers? How to convert a real-life phenomenon into information understood by microcontrollers? How do you implement control systems into real technical systems? How do you control power with microcontrollers?
Enrollment
06.11.2023 - 17.11.2023
Timing
01.01.2024 - 01.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Harri Kosonen
Teacher in charge
Harri Kosonen
Groups
-
STMI23SPBElectrical and Automation Engineering, full-time studies
Objective
You familiarize yourself with programmable microcontrollers. You understand the difference between analog and digital information in terms of microcontroller interfaces. You can connect different sensors to microcontrollers and you can fit devices with different voltage levels to controllers. You know how to use the C programming language to gather data from sensors and you can save and edit it.
Content
How does a microcontroller work? What is the difference between analog and digital signal processing with controllers? How to convert a real-life phenomenon into information understood by microcontrollers? How do you implement control systems into real technical systems? How do you control power with microcontrollers?
Evaluation scale
1-5
Enrollment
06.11.2023 - 17.11.2023
Timing
01.01.2024 - 29.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Kotka Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Jyrki Liikanen
Teacher in charge
Harri Kosonen
Groups
-
STMI23SPAElectrical and Automation Engineering, full-time studies
Objective
You familiarize yourself with programmable microcontrollers. You understand the difference between analog and digital information in terms of microcontroller interfaces. You can connect different sensors to microcontrollers and you can fit devices with different voltage levels to controllers. You know how to use the C programming language to gather data from sensors and you can save and edit it.
Content
How does a microcontroller work? What is the difference between analog and digital signal processing with controllers? How to convert a real-life phenomenon into information understood by microcontrollers? How do you implement control systems into real technical systems? How do you control power with microcontrollers?
Evaluation scale
1-5
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 03.05.2023
Number of ECTS credits allocated
5 op
Virtual portion
1 op
RDI portion
1 op
Mode of delivery
80 % Contact teaching, 20 % Distance learning
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Jyrki Liikanen
- Harri Kosonen
Teacher in charge
Jyrki Liikanen
Scheduling groups
- Ryhmä A (Size: 20. Open UAS: 0.)
- Ryhmä B (Size: 20. Open UAS: 0.)
- Ryhmä C (Size: 20. Open UAS: 0.)
Groups
-
STMI22SMElectrical and Automation Engineering, part-time studies
Small groups
- Ryhmä A
- Ryhmä B
- Ryhmä C
Objective
You familiarize yourself with programmable microcontrollers. You understand the difference between analog and digital information in terms of microcontroller interfaces. You can connect different sensors to microcontrollers and you can fit devices with different voltage levels to controllers. You know how to use the C programming language to gather data from sensors and you can save and edit it.
Content
How does a microcontroller work? What is the difference between analog and digital signal processing with controllers? How to convert a real-life phenomenon into information understood by microcontrollers? How do you implement control systems into real technical systems? How do you control power with microcontrollers?
Evaluation scale
1-5
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 08.05.2023
Number of ECTS credits allocated
5 op
RDI portion
1 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Harri Kosonen
Teacher in charge
Harri Kosonen
Groups
-
STMI22SPAElectrical and Automation Engineering, full-time studies
Objective
You familiarize yourself with programmable microcontrollers. You understand the difference between analog and digital information in terms of microcontroller interfaces. You can connect different sensors to microcontrollers and you can fit devices with different voltage levels to controllers. You know how to use the C programming language to gather data from sensors and you can save and edit it.
Content
How does a microcontroller work? What is the difference between analog and digital signal processing with controllers? How to convert a real-life phenomenon into information understood by microcontrollers? How do you implement control systems into real technical systems? How do you control power with microcontrollers?
Evaluation scale
1-5
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 28.04.2023
Number of ECTS credits allocated
5 op
RDI portion
1 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Harri Kosonen
Teacher in charge
Harri Kosonen
Groups
-
STMI22SPBElectrical and Automation Engineering, full-time studies
Objective
You familiarize yourself with programmable microcontrollers. You understand the difference between analog and digital information in terms of microcontroller interfaces. You can connect different sensors to microcontrollers and you can fit devices with different voltage levels to controllers. You know how to use the C programming language to gather data from sensors and you can save and edit it.
Content
How does a microcontroller work? What is the difference between analog and digital signal processing with controllers? How to convert a real-life phenomenon into information understood by microcontrollers? How do you implement control systems into real technical systems? How do you control power with microcontrollers?
Evaluation scale
1-5
Enrollment
08.11.2021 - 21.11.2021
Timing
01.01.2022 - 01.05.2022
Number of ECTS credits allocated
5 op
RDI portion
1 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Harri Kosonen
Teacher in charge
Harri Kosonen
Groups
-
STMI21SPAElectrical and Automation Engineering, full-time studies
Objective
You familiarize yourself with programmable microcontrollers. You understand the difference between analog and digital information in terms of microcontroller interfaces. You can connect different sensors to microcontrollers and you can fit devices with different voltage levels to controllers. You know how to use the C programming language to gather data from sensors and you can save and edit it.
Content
How does a microcontroller work? What is the difference between analog and digital signal processing with controllers? How to convert a real-life phenomenon into information understood by microcontrollers? How do you implement control systems into real technical systems? How do you control power with microcontrollers?
Evaluation scale
1-5
Enrollment
08.11.2021 - 21.11.2021
Timing
01.01.2022 - 01.05.2022
Number of ECTS credits allocated
5 op
RDI portion
1 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Harri Kosonen
Teacher in charge
Harri Kosonen
Groups
-
STMI21SPBElectrical and Automation Engineering, full-time studies
Objective
You familiarize yourself with programmable microcontrollers. You understand the difference between analog and digital information in terms of microcontroller interfaces. You can connect different sensors to microcontrollers and you can fit devices with different voltage levels to controllers. You know how to use the C programming language to gather data from sensors and you can save and edit it.
Content
How does a microcontroller work? What is the difference between analog and digital signal processing with controllers? How to convert a real-life phenomenon into information understood by microcontrollers? How do you implement control systems into real technical systems? How do you control power with microcontrollers?
Evaluation scale
1-5