AC and 3-phase circuitsLaajuus (5 cr)
Code: ST00BH18
Credits
5 op
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Qualifications
basic knowledge of DC circuits
Enrollment
04.11.2024 - 17.11.2024
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Harri Hartikainen
Scheduling groups
- Pienryhmä 1 (Size: 0. Open UAS: 0.)
- Pienryhmä 2 (Size: 0. Open UAS: 0.)
- Pienryhmä 3 (Size: 0. Open UAS: 0.)
- Pienryhmä 4 (Size: 0. Open UAS: 0.)
Groups
-
STMI24SPElectrical and Automation Engineering, full-time studies
Small groups
- 1
- 2
- 3
- 4
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Opiskelumateriaali
John O'Malley
Basic circuit analysis
Yksilölliset oppimisväylät
It is possible to complete the course individually by returning the course assignments to the supervising teacher and doing laboratory-exams
TKI ja työelämäyhteistyö
No
Tentit ja muut määräajat
The course includes two midterms and retests if necessary and laboratory-exams in separate times
Opiskelijan työmäärä
The course includes 130 hours of full-time work
Toteutuksen osien kuvaus
The course includes lectures and contact exercises and laboratory-exams
Evaluation scale
1-5
Assessment methods and criteria
The grade of the course is based on the average of the grades in the midterm exams and laboratory-exams
Qualifications
basic knowledge of DC circuits
Enrollment
04.11.2024 - 17.11.2024
Timing
01.01.2025 - 05.05.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 50
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Harri Hartikainen
Teacher in charge
Risto Kuitunen
Groups
-
STMI24SMElectrical and Automation Engineering, part-time studies
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Opiskelumateriaali
John O'Malley
Basic circuit analysis
Yksilölliset oppimisväylät
It is possible to complete the course individually by returning the course assignments to the supervising teacher and doing laboratory-exams
TKI ja työelämäyhteistyö
No
Tentit ja muut määräajat
The course includes two midterms and retests if necessary and laboratory-exams in separate times
Opiskelijan työmäärä
The course includes 130 hours of full-time work
Toteutuksen osien kuvaus
The course includes lectures and contact exercises and laboratory-exams
Evaluation scale
1-5
Assessment methods and criteria
The grade of the course is based on the average of the grades in the midterm exams and laboratory-exams
Qualifications
basic knowledge of DC circuits
Enrollment
06.11.2023 - 17.11.2023
Timing
01.01.2024 - 29.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
16 - 24
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Risto Kuitunen
Groups
-
STMI23SPAElectrical and Automation Engineering, full-time studies
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Opiskelumateriaali
John O'Malley
Basic circuit analysis
Yksilölliset oppimisväylät
It is possible to complete the course individually by returning the course assignments to the supervising teacher and doing laboratory-exams
TKI ja työelämäyhteistyö
No
Tentit ja muut määräajat
The course includes two midterms and retests if necessary and laboratory-exams in separate times
Opiskelijan työmäärä
The course includes 130 hours of full-time work
Toteutuksen osien kuvaus
The course includes lectures and contact exercises and laboratory-exams
Evaluation scale
1-5
Assessment methods and criteria
The grade of the course is based on the average of the grades in the midterm exams and laboratory-exams
Qualifications
basic knowledge of DC circuits
Enrollment
06.11.2023 - 17.11.2023
Timing
01.01.2024 - 28.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
16 - 24
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Risto Kuitunen
Groups
-
STMI23SPBElectrical and Automation Engineering, full-time studies
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Opiskelumateriaali
John O'Malley
Basic circuit analysis
Yksilölliset oppimisväylät
It is possible to complete the course individually by returning the course assignments to the supervising teacher and doing laboratory-exams
TKI ja työelämäyhteistyö
No
Tentit ja muut määräajat
The course includes two midterms and retests if necessary and laboratory-exams in separate times
Opiskelijan työmäärä
The course includes 130 hours of full-time work
Toteutuksen osien kuvaus
The course includes lectures and contact exercises and laboratory-exams
Evaluation scale
1-5
Assessment methods and criteria
The grade of the course is based on the average of the grades in the midterm exams and laboratory-exams
Qualifications
basic knowledge of DC circuits
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 01.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
0 - 40
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Veikko Nykänen
- Jyrki Liikanen
- Harri Kosonen
Teacher in charge
Veikko Nykänen
Groups
-
STMI22SMElectrical and Automation Engineering, part-time studies
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Opiskelumateriaali
Opettajan materiaalit
Yksilölliset oppimisväylät
Ei ole
TKI ja työelämäyhteistyö
Ei ole
Tentit ja muut määräajat
Kurssin lopuksi tentti
Kansainvälinen yhteistyö
Ei ole.
Opiskelijan työmäärä
Keskimäärin 25 h / op.
Harjoitustehtävät, joista osa palautettavia.
Evaluation scale
1-5
Assessment methods and criteria
Arvosana määräytyy tentin mukaan. Palautettavat harjoitustehtävät arviodaan hyväksytty/hylätty.
Hylätty harjoitustehtävä on korjattava ja kaikki harjoitustehtävät on oltava palautettuna hyväksytyksi ennen tenttiä.
Qualifications
basic knowledge of DC circuits
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 06.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Risto Kuitunen
Groups
-
STMI22SPAElectrical and Automation Engineering, full-time studies
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Opiskelumateriaali
John O'Malley
Basic circuit analysis
Yksilölliset oppimisväylät
It is possible to complete the course individually by returning the course assignments to the supervising teacher and doing laboratory-exams
TKI ja työelämäyhteistyö
No
Tentit ja muut määräajat
The course includes two midterms and retests if necessary and laboratory-exams in separate times
Opiskelijan työmäärä
The course includes 133 hours of full-time work
Toteutuksen osien kuvaus
The course includes lectures and contact exercises and laboratory-exams
Evaluation scale
1-5
Assessment methods and criteria
The grade of the course is based on the average of the grades in the midterm exams and laboratory-exams
Qualifications
basic knowledge of DC circuits
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 28.04.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Risto Kuitunen
Teacher in charge
Juha Korpijärvi
Groups
-
STMI22SPBElectrical and Automation Engineering, full-time studies
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Opiskelumateriaali
John O'Malley
Basic circuit analysis
Yksilölliset oppimisväylät
It is possible to complete the course individually by returning the course assignments to the supervising teacher and doing laboratory-exams
Tentit ja muut määräajat
The course includes two midterms and retests if necessary
Opiskelijan työmäärä
The course includes 133 hours of full-time work
Toteutuksen osien kuvaus
The course includes lectures and contact exercises and laboratory-exams
Evaluation scale
1-5
Assessment methods and criteria
The grade of the course is based on the average of the grades in the midterm exams and laboratory-exams
Qualifications
basic knowledge of DC circuits
Enrollment
08.11.2021 - 21.11.2021
Timing
01.01.2022 - 01.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Juha Korpijärvi
Teacher in charge
Jyrki Liikanen
Groups
-
STMI21SPAElectrical and Automation Engineering, full-time studies
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Opiskelumateriaali
John O'Malley
Basic circuit analysis
Yksilölliset oppimisväylät
It is possible to complete the course individually by returning the course assignments to the supervising teacher
TKI ja työelämäyhteistyö
No
Tentit ja muut määräajat
The course includes two midterms and retests if necessary
Opiskelijan työmäärä
The course includes 133 hours of full-time work
Toteutuksen osien kuvaus
The course includes lectures and contact exercises
Evaluation scale
1-5
Assessment methods and criteria
The grade of the course is based on the average of the grades in the midterm exams
Qualifications
basic knowledge of DC circuits
Enrollment
08.11.2021 - 21.11.2021
Timing
01.01.2022 - 01.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Juha Korpijärvi
Teacher in charge
Jyrki Liikanen
Groups
-
STMI21SPBElectrical and Automation Engineering, full-time studies
Objective
You show familiarity with the algebra of complex numbers and AC components. You are able to analyse AC and 3-phase circuits.
Content
What do the following concepts include:
- algebra of complex numbers
- serial and parallel circuits
- mesh analysis
- 3-phase circuits?
Opiskelumateriaali
John O'Malley
Basic circuit analysis
Yksilölliset oppimisväylät
It is possible to complete the course individually by returning the course assignments to the supervising teacher
TKI ja työelämäyhteistyö
No
Tentit ja muut määräajat
The course includes two midterms and retests if necessary
Opiskelijan työmäärä
The course includes 133 hours of full-time work
Toteutuksen osien kuvaus
The course includes lectures and contact exercises
Evaluation scale
1-5
Assessment methods and criteria
The grade of the course is based on the average of the grades in the midterm exams
Qualifications
basic knowledge of DC circuits