Technical drawing and CADLaajuus (5 cr)
Code: TT00ED19
Credits
5 op
Teaching language
- Finnish
Responsible person
- Henri Varis
Objective
1. You can read and draw simple HVAC drawings and understand focal mechanical drawings.
2. You understand the policies, challenges and possibilities of the information society and digital working environments.
3. You know ICT systems in your field of study and understand the role of information and information systems in organizations.
Content
* What kind of drawing symbols are used in HVAC drawings and what kind of standards and guidelines regulate the drawing?
* Which methods are used in technical pictures?
* What kind of drawing marks, line weights and line types are used in CAD drawing?
* How you can draw and print with AutoCAD?
Enrollment
04.11.2024 - 17.11.2024
Timing
06.01.2025 - 30.04.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Henri Varis
Teacher in charge
Henri Varis
Scheduling groups
- Ryhmä A (Size: 0. Open UAS: 0.)
- Ryhmä B (Size: 0. Open UAS: 0.)
Groups
-
TTMI24SPBuilding Services Engineering, full-time studies
Small groups
- Ryhmä A
- Ryhmä B
Objective
1. You can read and draw simple HVAC drawings and understand focal mechanical drawings.
2. You understand the policies, challenges and possibilities of the information society and digital working environments.
3. You know ICT systems in your field of study and understand the role of information and information systems in organizations.
Content
* What kind of drawing symbols are used in HVAC drawings and what kind of standards and guidelines regulate the drawing?
* Which methods are used in technical pictures?
* What kind of drawing marks, line weights and line types are used in CAD drawing?
* How you can draw and print with AutoCAD?
Opiskelumateriaali
Opiskelumateriaali julkaistaan Learn-ympäristössä opintojakson aikana
Yksilölliset oppimisväylät
Opetus toteutetaan kokonaan lähiopetuksena Mikkelin kampuksella lukujärjestyksen mukaan. Etäosallistuminen ei ole mahdollista. Lähiopetusta ei lähtökohtaisesti tallenneta, eikä sitä korvata etäluennoilla silloin, kun lähiopetusta annetaan lukujärjestyksen mukaan.
Opiskelu rytmittyy työjärjestyksen mukaisten ryhmätapaamisten ja itsenäisesti tehtävien/ryhmässä tehtävien oppimistehtävien mukaan.
TKI ja työelämäyhteistyö
Opintojaksolla ei ole TKI-yhteistyötä
Tentit ja muut määräajat
Opintojakson tenttien ja palautettavien harjoitustehtävien ajankohdat sovitaan opintojakson aikana
Opiskelijan työmäärä
1 op vastaa noin 27 tuntia opiskelijan työtä. Työmäärä kuitenkin riippuu opiskelutaidoista ja aiemmasta osaamisesta.
5 op:n opintojaksolla opiskelijan työmäärä on n. 135 t
Evaluation scale
1-5
Assessment methods and criteria
Arviointi tehdään suhteessa opintojakson osaamistavoitteisiin ja arviointikriteereihin. Opintojakson hyväksytty suorittaminen edellyttää harjoitustehtävien sekä tenttien tekemistä hyväksytyllä arvosanalla.
Enrollment
08.04.2024 - 21.04.2024
Timing
02.09.2024 - 20.12.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Henri Varis
Groups
-
TTMI24KMBuilding Services Engineering, part-time studies
Objective
1. You can read and draw simple HVAC drawings and understand focal mechanical drawings.
2. You understand the policies, challenges and possibilities of the information society and digital working environments.
3. You know ICT systems in your field of study and understand the role of information and information systems in organizations.
Content
* What kind of drawing symbols are used in HVAC drawings and what kind of standards and guidelines regulate the drawing?
* Which methods are used in technical pictures?
* What kind of drawing marks, line weights and line types are used in CAD drawing?
* How you can draw and print with AutoCAD?
Opiskelumateriaali
Opiskelumateriaalit ovat käytettävissä Learnissa
Yksilölliset oppimisväylät
Ilmoittautuessasi tälle opintojakson toteutukselle osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelijat suorittavat opiskelua lukujärjestyksen mukaisesti.
TKI ja työelämäyhteistyö
Opintojaksolla ei ole työelämäyhteistyötä.
Tentit ja muut määräajat
Tenttien ja palautettavien tehtävien ajankohta sovitaan opintojakson alkaessa.
Opiskelijan työmäärä
5op = 135h
Evaluation scale
1-5
Enrollment
06.11.2023 - 17.11.2023
Timing
08.01.2024 - 30.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Henri Varis
Teacher in charge
Henri Varis
Scheduling groups
- Pienryhmä a (Size: 0. Open UAS: 0.)
- Pienryhmä b (Size: 0. Open UAS: 0.)
Groups
-
TTMI23SPBuilding Services Engineering, full-time studies
Small groups
- 1
- 2
Objective
1. You can read and draw simple HVAC drawings and understand focal mechanical drawings.
2. You understand the policies, challenges and possibilities of the information society and digital working environments.
3. You know ICT systems in your field of study and understand the role of information and information systems in organizations.
Content
* What kind of drawing symbols are used in HVAC drawings and what kind of standards and guidelines regulate the drawing?
* Which methods are used in technical pictures?
* What kind of drawing marks, line weights and line types are used in CAD drawing?
* How you can draw and print with AutoCAD?
Opiskelumateriaali
Opiskelumateriaalit ovat käytettävissä Learnissa
Yksilölliset oppimisväylät
Ilmoittautuessasi tälle opintojakson toteutukselle osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelijat suorittavat opiskelua lukujärjestyksen mukaisesti.
TKI ja työelämäyhteistyö
Opintojaksolla ei ole työelämäyhteistyötä.
Tentit ja muut määräajat
Tenttien ja palautettavien tehtävien ajankohta sovitaan opintojakson alkaessa.
Opiskelijan työmäärä
5op = 135h
Evaluation scale
1-5
Enrollment
06.04.2023 - 21.04.2023
Timing
28.08.2023 - 31.12.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Henri Varis
Teacher in charge
Henri Varis
Groups
-
TTMI23KMBuilding Services Engineering, part-time studies
Objective
1. You can read and draw simple HVAC drawings and understand focal mechanical drawings.
2. You understand the policies, challenges and possibilities of the information society and digital working environments.
3. You know ICT systems in your field of study and understand the role of information and information systems in organizations.
Content
* What kind of drawing symbols are used in HVAC drawings and what kind of standards and guidelines regulate the drawing?
* Which methods are used in technical pictures?
* What kind of drawing marks, line weights and line types are used in CAD drawing?
* How you can draw and print with AutoCAD?
Opiskelumateriaali
Opiskelumateriaalit ovat käytettävissä Learnissa
Yksilölliset oppimisväylät
Ilmoittautuessasi tälle opintojakson toteutukselle osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelijat suorittavat opiskelua lukujärjestyksen mukaisesti.
TKI ja työelämäyhteistyö
Opintojaksolla ei ole työelämäyhteistyötä.
Opiskelijan työmäärä
135h
Evaluation scale
1-5
Enrollment
07.11.2022 - 18.11.2022
Timing
09.01.2023 - 01.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 40
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Henri Varis
Teacher in charge
Henri Varis
Scheduling groups
- Pienryhmä a (Size: 20. Open UAS: 0.)
- Pienryhmä b (Size: 20. Open UAS: 0.)
Groups
-
TTMI22SPBuilding Services Engineering, full-time studies
Small groups
- Pienryhmä a
- Pienryhmä b
Objective
1. You can read and draw simple HVAC drawings and understand focal mechanical drawings.
2. You understand the policies, challenges and possibilities of the information society and digital working environments.
3. You know ICT systems in your field of study and understand the role of information and information systems in organizations.
Content
* What kind of drawing symbols are used in HVAC drawings and what kind of standards and guidelines regulate the drawing?
* Which methods are used in technical pictures?
* What kind of drawing marks, line weights and line types are used in CAD drawing?
* How you can draw and print with AutoCAD?
Opiskelumateriaali
Opiskelumateriaalit ovat käytettävissä Learnissa
Yksilölliset oppimisväylät
Ilmoittautuessasi tälle opintojakson toteutukselle osallistut työjärjestyksen mukaiseen opetukseen ja ohjaukseen. Opiskelijat suorittavat opiskelua lukujärjestyksen mukaisesti.
TKI ja työelämäyhteistyö
Opintojaksolla ei ole työelämäyhteistyötä.
Tentit ja muut määräajat
Tenttien ja palautettavien tehtävien ajankohta sovitaan opintojakson alkaessa.
Opiskelijan työmäärä
5op = 135h
Evaluation scale
1-5
Enrollment
08.11.2021 - 21.11.2021
Timing
10.01.2022 - 30.04.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 45
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Henri Varis
Teacher in charge
Henri Varis
Scheduling groups
- Ryhmä A (Size: 0. Open UAS: 0.)
- Ryhmä B (Size: 0. Open UAS: 0.)
Groups
-
TTMI21SPBuilding Services Engineering, full-time studies
Small groups
- Ryhmä A
- Ryhmä B
Objective
1. You can read and draw simple HVAC drawings and understand focal mechanical drawings.
2. You understand the policies, challenges and possibilities of the information society and digital working environments.
3. You know ICT systems in your field of study and understand the role of information and information systems in organizations.
Content
* What kind of drawing symbols are used in HVAC drawings and what kind of standards and guidelines regulate the drawing?
* Which methods are used in technical pictures?
* What kind of drawing marks, line weights and line types are used in CAD drawing?
* How you can draw and print with AutoCAD?
Evaluation scale
1-5
Enrollment
08.11.2021 - 21.11.2021
Timing
03.01.2022 - 30.04.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
20 - 45
Degree programmes
- Degree Programme in Building Services Engineering
Teachers
- Henri Varis
Teacher in charge
Henri Varis
Groups
-
TTMI21SMBuilding Services Engineering, part-time studies
Objective
1. You can read and draw simple HVAC drawings and understand focal mechanical drawings.
2. You understand the policies, challenges and possibilities of the information society and digital working environments.
3. You know ICT systems in your field of study and understand the role of information and information systems in organizations.
Content
* What kind of drawing symbols are used in HVAC drawings and what kind of standards and guidelines regulate the drawing?
* Which methods are used in technical pictures?
* What kind of drawing marks, line weights and line types are used in CAD drawing?
* How you can draw and print with AutoCAD?
Evaluation scale
1-5