Automation designLaajuus (5 cr)
Code: ST00BH30
Credits
5 op
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
04.11.2024 - 17.11.2024
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
0 - 20
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Teemu Manninen
Groups
-
STMI23SPAElectrical and Automation Engineering, full-time studies
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Opiskelumateriaali
Learn
Yksilölliset oppimisväylät
Laboratorio / itsenäinen työskentely
TKI ja työelämäyhteistyö
-
Evaluation scale
1-5
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
04.11.2024 - 17.11.2024
Timing
01.01.2025 - 31.07.2025
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
0 - 20
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Teemu Manninen
Groups
-
STMI23SPBElectrical and Automation Engineering, full-time studies
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Opiskelumateriaali
Learn
Yksilölliset oppimisväylät
Laboratorio / itsenäinen työskentely
TKI ja työelämäyhteistyö
-
Evaluation scale
1-5
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
06.11.2023 - 17.11.2023
Timing
05.01.2024 - 08.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Mika Ruponen
Scheduling groups
- Ryhmä A (Size: 20. Open UAS: 0.)
- Ryhmä B (Size: 20. Open UAS: 0.)
Groups
-
STMI22SMElectrical and Automation Engineering, part-time studies
Small groups
- Ryhmä A
- Ryhmä B
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Evaluation scale
1-5
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
06.11.2023 - 17.11.2023
Timing
03.01.2024 - 03.05.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Teemu Manninen
Groups
-
STMI22SPAElectrical and Automation Engineering, full-time studies
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Evaluation scale
1-5
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
06.11.2023 - 17.11.2023
Timing
01.01.2024 - 30.04.2024
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Teemu Manninen
Groups
-
STMI22SPBElectrical and Automation Engineering, full-time studies
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Evaluation scale
1-5
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 01.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Teemu Manninen
Groups
-
STMI21SPAElectrical and Automation Engineering, full-time studies
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Evaluation scale
1-5
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
07.11.2022 - 18.11.2022
Timing
01.01.2023 - 01.05.2023
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Teemu Manninen
Groups
-
STMI21SPBElectrical and Automation Engineering, full-time studies
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Evaluation scale
1-5
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
08.11.2021 - 21.11.2021
Timing
02.01.2022 - 06.05.2022
Number of ECTS credits allocated
5 op
RDI portion
1 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
1 - 20
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Teemu Manninen
Scheduling groups
- Ryhmä A (Size: 0. Open UAS: 0.)
- Ryhmä B (Size: 0. Open UAS: 0.)
Groups
-
STMI20SMElectrical and Automation Engineering, part-time studies
Small groups
- Ryhmä A
- Ryhmä B
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Opiskelumateriaali
LEARNISSA
Yksilölliset oppimisväylät
Suunnitellaan kokonaisuudessaan pienimuotoinen automaatiolaitteisto, joka myöskin toteutetaan ja ohjelmoidaan. Opiskellaan MODBUS ethernetin käyttö ja HMI-paneelin ohjelmointi.
Kohteena on luokassa oleva pesukone
Evaluation scale
1-5
Assessment methods and criteria
Arvointi tehdään harjoitustöiden perusteella.
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
08.11.2021 - 21.11.2021
Timing
02.01.2022 - 06.05.2022
Number of ECTS credits allocated
5 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Teemu Manninen
Groups
-
STMI20SPBElectrical and Automation Engineering, full-time studies
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Opiskelumateriaali
LEARNISSA
Yksilölliset oppimisväylät
Suunnitellaan kokonaisuudessaan pienimuotoinen automaatiolaitteisto, joka myöskin toteutetaan ja ohjelmoidaan. Opiskellaan MODBUS ethernetin käyttö ja HMI-paneelin ohjelmointi.
Kohteena on luokassa oleva pesukone
Evaluation scale
1-5
Assessment methods and criteria
Arvointi tehdään harjoitustöiden perusteella.
Qualifications
PLCs, Automation technology, Embedded automation
Enrollment
08.11.2021 - 21.11.2021
Timing
01.01.2022 - 06.05.2022
Number of ECTS credits allocated
5 op
RDI portion
1 op
Mode of delivery
Contact teaching
Unit
Department of Electrical Engineering, Building Services and Material Technology
Campus
Mikkeli Campus
Teaching languages
- Finnish
Seats
1 - 20
Degree programmes
- Degree Programme in Electrical and Automation Engineering
Teachers
- Teemu Manninen
Teacher in charge
Teemu Manninen
Groups
-
STMI20SPAElectrical and Automation Engineering, full-time studies
Objective
Students are able to implement the automation, programming and documentation of a process with the help of programmable logic.
Content
How are sensor uses designed?
How is the required logic selected?
How is process mechatronics planned?
How is customer-oriented guidance of a process carried out?
How is documentation carried out?
Opiskelumateriaali
LEARNISSA
Yksilölliset oppimisväylät
Suunnitellaan kokonaisuudessaan pienimuotoinen automaatiolaitteisto, joka myöskin toteutetaan ja ohjelmoidaan. Opiskellaan MODBUS ethernetin käyttö ja HMI-paneelin ohjelmointi.
Kohteena on luokassa oleva pesukone
Evaluation scale
1-5
Assessment methods and criteria
Arvointi tehdään harjoitustöiden perusteella.
Qualifications
PLCs, Automation technology, Embedded automation